Installation Instructions; Installing Your Washer; Tools Needed; Parts Supplied - Haier HWD1600BW Guide De L'utilisateur

instaLLation instruCtions

instaLLing your WasHEr

We recommend that your new washer be installed by a qualified appliance
technician. If you feel that you have the skills to install the washer, please read the
installation instructions carefully before installing.
If, after completing these step, you are unsure that the washer is properly
installed, contact a qualified appliance technician.
If your washer was just delivered and the outside temperature was below
freezing, do not operate until the washer warms up to room temperature.

tooLs nEEDED

You will need to have the following tools to help you in the installation of
your washer:
• Scissors
• Tape Measure
• Standard Screwdriver
• Gloves

parts suppLiED

Water Hoses (2)
(Flat washers are pre-
installed)
8
Caution
Warning
• Pliers
• Level
• Wrench
Plastic Plugs (3)
(Used to plug
transportation bolt holes)
Drain Hose
Support Bracket