Siemens 6952L Guide D'instructions page 28

Press the PLAY 10. button. Keeping it pressed for less than 5 seconds the dosing machine works in
pulses. Over 5 seconds the dosing machine works until the STOP 9 button is pressed.
D
General rule
For minimum adjustment of the set values, press the + or - keys to end the values.
For a greater change click on the value. The screen below (E) will open.
E
LEGA
srl
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
12
13
14
15
16
D – MANUAL SETTINGS
(ref 11 – fig. C)
12 Forward Speed: indicates the speed
of rotation of the gears in the forward
direction
13 Back Speed: indicates the speed of
rotation of the gears in the backward
direction
14 Drip-Stop Return: the drip-stop
system comes into operation at the end
of each dosing. This is necessary so that
no annoying honey dripping occurs onto
the surface, once the jar has been
removed. The gears rotate for a few
degrees in the direction opposite to that
used during dosing. This quantity of
degrees is set in this field: the higher the
value, the greater the return, and vice-
versa. Adjust the return according to the
type of spout chosen: with the large
spout the return must be longer, with the
small spout the return must be shorter
E – NUMERICAL KEYPAD
With the NUMERICAL KEYPAD 15 type
in the chosen value.
Confirming with ENTER 16, return
automatically to the previous screen.
28 / 95