Siemens 6952L Guide D'instructions page 30

21 PLAY: it starts automatic dosage
(Display and F2 key)
22 Settings: the 'automatic settings'
page is accessed, which includes,
among other aspects, the calibration of
the dosing
23 Reset: it resets the value of point 19
H – AUTOMATIC OPERATION
(custom dosages)
The dosages we pre-set won't always be
completely satisfactory.
On this page each customer can set their
own custom doses, no less than 7,
H
which will remain in the memory.
By clicking on the custom icons it is
possible to access the next page on
which to enter the desired weight. This
procedure is explained in point I.
I - CUSTOM DOSE
24 Previous page: Return to the
previous page.
25 Quantity to be produced: This value
indicates the quantity of jars still to be
24
27 26
25
filled. It is very useful to avoid having to
personally count the jars produced. To
modify the value, act as described above
in point (E).
Attention! If the number is 0 the dosing
machine will not work! If it is not
necessary to count the jars to be dosed,
set a very high number, example 999.
I
26 Quantity produced: Here the number
of jars already filled is indicated.
27 Nominal weight: The personalised
dose decided is shown here. Click on the
value, in this case 150, to access the
numeric keypad (ref fig E).
28 29
30 31
28 STOP: it stops the automatism of the
dosing sequence (Display and F1 key)
29 PLAY: Start dosing in automatic
(Display and F2 key)
LEGA
srl
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
30 / 95