Using The Kaossilator Pro+ As A Midi Controller - Korg KAOSSILATOR PRO+ Manuel D'utilisation

filtered). For
(Int),
The KAOSSILATOR PRO+ will
(Int):
function using its internal clock.
Choose this setting if you're using
the KAOSSILATOR PRO+ on its
own, or as the master (the control-
ling device), where external MIDI
devices are synchronized.
The KAOSSILATOR PRO+ will
(Ext):
synchronize to MIDI clock mes-
sages that are received from an
external MIDI device connected to
the MIDI IN connector or to the USB
connector.
TIP: If you choose "Ext" as the clock
setting, USB will take priority if clock
messages are received via both
MIDI and USB.
TIP: For more about settings for syn-
chronizing with an external MIDI de-
vice, please refer to the owner's
manual of the device you're using.
If MIDI clock messages are received
(Auto):
from an external MIDI device
connected to the MIDI IN connector
or USB connector, the KAOSSILA-
TOR PRO+ will automatically
function using the "Ext" setting. If
clock messages are not being
received, the KAOSSILATOR PRO+
will function using the "Int" setting.
5. If you want to store the setting, press the
WRITE button. If you don't want to store the
setting, press the SHIFT button.
22
(clock), you can specify
(Ext), or (Auto).
Using the KAOSSILATOR PRO+ as a
MIDI controller
In External Control mode you can use the KA-
OSSILATOR PRO+ as a MIDI controller to con-
trol an external MIDI device such as a synthe-
sizer, or a software synthesizer on your
computer.
Example connections for External Control
mode
MIDI OUT
TIP: For details on the parameters that can be con-
trolled, please refer to the owner's manual of the de-
vice or software that you're using.
TIP: Depending on the device or software that you're
using, there may be cases where parameters cannot
be controlled, or cases where you must adjust settings
first. Please refer to the owner's manual for the device
or software that you're using.
Switching to External Control mode
Hold down the SHIFT button and press the
PROGRAM MEMORY 8 (EXT.CTRL) button.
To exit External Control mode, press the SHIFT
button.
MIDI message assignments in External Control
mode
Assignments for the MIDI messages transmit-
ted in External Control mode are made using
the KAOSSILATOR PRO+ Editor.
TIP: The KAOSSILATOR PRO+ Editor can be down-
loaded free of charge from the Korg website (http://
www.korg.com). For details on how to adjust these
settings, please refer to the documentation included
with the KAOSSILATOR PRO+ Editor.
MIDI IN
ELECTRIBE MX-SD