Before The First Use; Installation Of The Carbon Filter - Tristar AC-5498 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19

Before the firSt uSe

When fixed or moved, the device can not be set horizontally or declined
to more then 45° or upside-down. The refrigerant circuit is checked for
leak tightness.
SPeCifiCAtionS
Cooling capacity:
Power/Ampere consumption: 1340W / 6.14A
Air Volume (max speed):
Power supply:
Timer:
Working temperature:
Before uSe
• Place the appliance on a flat stable surface and hold at least 30
cm. free space around it. Make sure the unit is placed in a upright
position.
• Let the unit, after transport, wait for more than 4 hours befure it is
plugged in into the walloutlet. Prevent the cabinet to get wet.
• Make sure the power cable to the power plug is not curled up on
the back of the device, it can be too hot. Place the plug always into
a grounded outlet.
• Never place the appliance near any heat sources or direct sunlight.
6
12000BTU / 3,5 KW
480 M³/H
220~240V, 50 Hz
1~ 24 hours
18~32 °C

inStAllAtion of the CArBon filter

1. Remove the air filter frame from the unit.
2. Separate the filter holder from the filter frame.
3. Remove the carbon filter from its plastic bag.
4. Insert the carbon filter into the filter frame.
5. Fix the filter by reassembling the fixer onto the filter frame.
6. Re-fit the filter frame inside the unit.
Mounting the exhaust accessories.
• The air conditioning system cools the air in the room where unit
is placed. The absorbed heat of the conditioned air, should be
removed to outside the room where the unit is placed.

Publicité

Table des Matières
loading

Table des Matières