Setting Temperature; Setting Timer; Sleep Function - Tristar AC-5498 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
• Turn the knob condensate drain off the spout. Place a container
under the spout and pull the rubber plug from the spout. The water
flows out, when the bowl is full, insert the plug, empty the sump and
drain the rest of the water.
• If the condensation must be removed continuously, place the
condensation drain hose on the spout. Do remove the rubber plug.
The condensate drain hose can be extended with another hose (not
supplied). It can be connected to a drain or be led outside. Make
sure this hose does not go up.
uSe
• Always place the plug into a grounded socket.
• Press ON/OFF button, the unit will work in cool mode with low fan
speed, the pre-setting temperature is 24°C.
• Indicators of the functions in progress come on at the same time.
*NOTE! The display window shows the ambient room temperature
from 0oC to 50oC
• To turn the unit off, press ON/OFF button again.
Setting mode/funCtion
• Press MODE button to select required working mode: cooling, or fan.
• Sign of your selected mode comes on.
8

Setting temPerAture

• Press 'Temperature up' or 'Temperature down' button to regulate
the temperature you desired.
• The display window will show the temperature you set as you press
'Temperature up' or 'Temperature down' button. Otherwise, it will
always show the ambient temperature.
• The pre-setting temperature of this machine is: 24°C for cooling.
Setting VentilAtion SPeed
Press SPEED button to choose the ventilation speed you need, high or
low. The sign of high or low ventilation will light on at the same time.

Setting timer

• Press TIMER button to set the operating hours you desired (1 to 24
hours, the sign of timer will light on). When the set time has been
reached, the machine will turn off automatically. The display window
will show the hour(s) you set as you press TIMER button. If the
timer button is not pressed, the unit will work continuously.
• By pressing the timer but without turning on the other functions, you
can PRE-SET the time for the machine to work. For example, if you
press the timer to '2', the unit will work automatically after 2 hours.

SleeP funCtion

• In cooling mode, by pressing the SLEEP button, the set
temperature will increase 1oC at the 1st hour, another 1 oC at the
second hour, then keeps at that temperature.
• In sleep mode, the ventilation will keep at low speed. Re-press the
SLEEP button, the setting temperature and ventilation speed will
return to the pre-selected one.
• The unit will shut down automatically after the SLEEP function
running for 12 hours.
• Please note, the sleep function is not available while the machine
is working in ventilation, dehumidification or auto mode. Only
available in the Cooling mode.

Publicité

Table des Matières
loading

Table des Matières