Before The First Use; Parts Description - Tristar AC-5491 Mode D'emploi

Masquer les pouces Voir aussi pour AC-5491:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
• Make sure that the cord is not hanging over the edge of the table
or counter, does not touch any hot surfaces or is coming directly
into contact with the hot parts of the appliance. Do not place the
appliance underneath or close to curtains, window coverings etc.
• Make sure that the maximum level will never be exceeded.
(*) Competent qualified electrician: after sales department of the
producer or importer or any person who is qualified, approved
and competent to perform this kind of repairs in order to avoid
all danger. In any case you should return the appliance to this
electrician.

PArtS deSCriPtion

1. Display panel
2. Control buttons
3. Outlet of air flow
10
4. Air guides
5. Water level glass
6. Roller
7. Door
8. Water tank
9. Grid screws
10. R emote control
4
9
8
7
6

Before the firSt uSe

• O pen the packaging and take out the ventilator. Check the contents
against the list.
• Place the ventilator on a flat horizontal surface. It must not be at
an incline during use. Check that the power supply from the mains
meets the technical characteristics written on the ventilator.
• Fill with water. If the ventilator is new or has not been used for a long
time and you want to use it as a humidifier, it is necessary to fill with
water before use. Check the water level while filling. Stop the unit
before filling with water to avoid electrical breakdowns. Once the
water has been filled up to the maximum level, close.
fig. 3
1
2
3
uSe
• Insert the plug into the socket and activate the device with the on/
4
off button. When you press again the device will turn off.
• See the following schedule for the different function to select.
When choosing the Cool function the device will blow
moistened air because the air will be blown true the wet filter,
Cool
by adding some ice to the water the device will blow cold air.
Press again and the device will operate without moistened air.
5
This option allows you to activate the oscillation mode, press
Swing
once on the "Swing" button and the unit will automatically
blow the airflow from left to right in a range of 120 degrees.
fig. 4
fig. 5

Publicité

Table des Matières
loading

Table des Matières