Before The First Use - Tristar AC-5410 Mode D'emploi

Instruction manual

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Place the device on a flat stable surface and ensure a minimum of
20 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the voltage
which is indicated on the device matches the local voltage before
connecting the device. Voltage 220V~240V 50/60Hz)
OPERATION
• Press the Power button once to start operation. Press it again to stop
operation.
Draining the collected water
When the drainage tank is full, the tank full indicator light will turn on,
the operation will stop automatically and the buzzer will beep 15 times to
alert the user, that the water need to be emptied from the drainage tank.
4
Emptying the Drainage Tank
1. Lightly press on the sides of the tank with both hands and pull the tank
out gently.
2. Discard the collected water
NOTE
• Do not remove the float from the water tank. The water full sensor will
no longer be able to detect the water level correctly without the float
and water may leak from the water tank.