Erp Function; Bluetooth & App; Warranty; Cleaning And Maintenance - Tunturi T20 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour T20:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
English
- Target heartrate will be show, based on your set age. Target heart
rate = (220-age) x0,6.
Press "Up/ Down" buttons to change target value 60~200) press
"Mode" button to confirm.
- Set your workout time the display shows "30:00"
Press "Up/ Down" buttons to select: 5:00~99:00
press "Mode" button to confirm.
- Press the "Start/ Pause" button to start the program.
HRC operating function:
- HRC programs starts with a one minute warm up time. ( speed will
not auto adjust )
- The initial speed is 1.0 km/h, this can be adjust to a comfortable
warm up speed manually.
- Console checks heart rate every 30 seconds and controls the speed
as below
Heart rate
parameter
29+ BPM
Under target
6~29 BPM
Under target
0~5 BPM
Under target
0~5 BPM
Over target
6~29 BPM
Over target
29+ BPM
Over target
‼ NOTE
Incline setting is not controlled in HRC program mode but
can be controlled by user at any time to intensify or ease your
workout.
Speed can be changed by user at all times.
When speed is over the pre set speed limit it will auto adjust to
pre set speed setting automatically.
If no heart rate is detected, the treadmill will stop workout.
⚠ CAUTION
Heart rate measurement is required for this function.

ERP Function

ERP function can shut your treadmill in sleep mode automatically
when being without operation for 4:30 minutes.
You can turn this function On and off by:
- When treadmill is in "start up mode" press and hold "Mode"
button for 3 seconds to switch between On and Off mode.
Display shows "1111" indicates On mode.
Machine will turn to sleep mode after 4:30 minutes being idle.
Display shows "2222" indicates Off mode.
Machine will not turn into sleep mode after 4:30 minutes being
idle.
⚠ CAUTION
We recommend to set ERP function in On mode always.
Bluetooth & APP
- This console can connect with an APP on a smart device by
Bluetooth (iOS & Android).
- Establish the Bluetooth connection only via the connection mode
on the installed APP on your smart device.
‼ NOTE
Tunturi only provides the option to connect your fitness console
throughout a blue tooth connection. Therefore Tunturi cannot
be held responsible for damage, or malfunctioning of products
other than Tunturi products.
Check the website for extra information.
Warranty terms
The consumer is entitled to the applicable legal rights stated in the
national legislation concerning the commerce of consumer goods.
This warranty does not restrict these rights. The Purchaser's Warranty
is only valid if the item is used in an environment approved by Tunturi
New Fitness BV for that particular equipment. The product-specific
approved environment is stated in the Owner's Manual provided with
your equipment.
Warranty conditions
The warranty conditions commence from the date of purchase.
Warranty conditions may vary per country, so please consult your
local dealer for the warranty conditions.
speed adjust
Warranty coverage
Under no circumstances shall Tunturi New Fitness BV or the Tunturi
+ 2.0 Km/h
Distributor be liable by virtue of this warranty or otherwise for any
+ 1.0 Km/h
special, indirect, secondary or consequential damages of any nature
arising out of any use or inability to use this equipment.
No adjust
No adjust
Warranty limitations
- 1.0 Km/h
This warranty covers manufacturing defects in the fitness equipment
as originally packed by Tunturi New Fitness BV. The warranty shall
- 2.0 Km/h
apply only under conditions of normal, recommended use of the
product as described in the Owner's Manual and providing that
Tunturi New Fitness BV's instructions for installation, maintenance and
use have been complied with. Neither Tunturi New Fitness BV's nor
the Tunturi Distributors'
obligations apply to defects due to reasons beyond their control. The
warranty applies only to the original purchaser and is valid only in
countries where Tunturi New Fitness BV has an authorised importer.
The warranty does not extend to fitness equipment or components
that have been modified without the consent of Tunturi New Fitness
BV. Defects resulting from normal wear, misuse, abuse, corrosion, or
damage incurred during loading or transportation are not covered.
The warranty does not cover sounds or noises emitted during use
where these do not substantially impede the use of the equipment
and where they are not caused by a fault in the equipment.
The warranty does not cover defects arising from the failure to
carry periodic maintenance as outlined within the Owner's Manual
for the product. Furthermore, the warranty does not cover defects
arising from usage and storage within an unsuitable environment
as described within the Owner's Manual which should be indoors,
dry, dust and grit free and within a temperature range of +15°C to
+35°C. The warranty does not cover maintenance activities, such as
cleaning, lubricating, and normal part adjustments, nor installation
procedures that customers can accomplish themselves, such as
changing uncomplicated meters, pedals and other similar parts not
requiring any dismantling/reassembling of the fitness equipment.
Warranty repairs carried out by other than authorised Tunturi
representatives are not covered.
Failure to follow the instructions given in the Owner's Manual will
invalidate the product's warranty.
⚠ WARNING
- Do not block the ventilation openings. Keep the ventilation
- Clean the equipment with a soft, absorbent cloth after each use.
2 0

Warranty

Cleaning and maintenance

Before cleaning and maintenance, remove the mains plug from
the wall socket.
Do not use solvents to clean the equipment.
openings clear from dust, dirt and other obstructions.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

T20 competence 2020

Table des Matières