Console; Major Function Keys - Tunturi GO 10 Mode D'emploi

Console

SAFETY KEY:
The monitor and the treadmill can be
operated only with the key attached on
the SAFETY KEY button and both of the
monitor and the treadmill stop as soon
as the key is removed.

MAJOR FUNCTION KEYS:

INCLINE +:
• Increases the incline level in the
range from 0 % to 10 % shown in
the Pulse / Incline Display. Pressing
once increases 1 %, speed up the
increment by pressing and holding it
for 2 seconds.
• Press this button to choose the
program.
INCLINE –:
• Decreases the incline level in the
range from 0 % to 10 % shown in the
Pulse / Incline Display. Pressing once
decreases 1 % and to speed up the
decrement by pressing and holding it
for 2 seconds.
• Press this button to choose the
program.
START/STOP:
• Starts or stops the program.
6
Re-Start :
• If the Treadmill is stopped during use,
the machine turns in pause mode.
When the START button is pressed
again, the treadmill will ramp-up the
speed to where it was stopped. If the
treadmill is stopped for 5 minutes or
more, Power is lost and the treadmill
will have to be re-started.
ENTER / SELECT:
• Press this button to confirm your
desired program or setting value.
• Press to display time, incline, pulse,
distance, calories, speed.
SPEED +:
• Increases the speed level in the
range from 0.8 to 16.0 KPH (0.5 to
10 MPH). Pressing once increases
0.2KPH (0.1 MPH) and to speed
up the increment by pressing and
holding it for 2 seconds.
• Press this button to choose the
program.
SPEED –:
• Decreases the speed level in the
range from 0.8 to 16.0 KPH (0.5 to 10
MPH). Pressing once decreases 0.2
KPH (0.1 MPH) and to speed up the
decrement by pressing and holding it
for 2 seconds.
• Press this button to choose the
program.
C. SPEED HOT KEYS:
3 Speed Hot Keys are set as 3, 6, 9 KPH
/ 3, 6, 9 MPH. For example, the speed
changes from any speed to 9 KPH by
pressing the Speed
Hot Key 9.
D. INCLINE HOT KEYS:
3 Incline Hot Keys are set as 3, 6, 9 %.
For example, the incline level changes
from any level to 6 % by pressing the
Incline Hot Key 6.