Line Connection And Installation - Depaepe SecurAccess Compact PMR Notice D'utilisation

SecurAccess Compact PMR – User Guide

1.1. Line connection and installation

Programming
Keypad
RAZ (Reset)
Switch
Leds/Overboost
ON : Activated
OFF: Not Activated
Memory/Off-hook
buttons M1, M2
ON
Without line
Line current
current
regulation shunt
OFF
ON
With line current
regulation
OFF
In order to improve the protection against humidity and bad weather:
Drill the cable(s) holes with a slightly thinner dimension than the diameter of the
!
cable itself,
bend the cable downwards to let the water and humidity run outside of the case.
!
Intérieur/Inside
Passe-câble / Rubber cap
Câble / Cable
Paroi de l'appareil
Housing surface
To prevent from electric shocks, do not remove rubber line cord entries
inside the case.
Extérieur/Outside
Bon/Good
Microphone
Connection
ON/OFF Switch
Exit Bouton Activation
HP Connection
Exit Button Connection
Exit button timed activation
Selection switch
Activated Heating Resistor
Actived
Intérieur/Inside Extérieur/Outside
Mauvais/Bad
29
Not
Actived