Connecting The Power - FS S3900 MANAGED L2 GIGABIT SWITCHS Série Guide De Démarrage Rapide

Connecting the Power

1. Plug the AC power cord into the power port on the back of the switch.
2. Connect the other end of the power cord to an AC power source.
WARNING: Do not install power cable while the power is on.
Connecting the RJ45 Ports
1. Connect an Ethernet cable to the RJ45 port of a computer, printer, network storage, or other
network devices.
2. Connect the other end of the Ethernet cable to the RJ45 port of the switch.
O N
O FF
9