Connecting The Power Cord - FS Mux Demux DWDM Actif Guide De Démarrage Rapide

Connecting the Power Cord

1. Plug the AC power cord into the power port on the back of the Mux Demux.
2. Connect the other end of the power cord to an AC power source.
WARNING:
Do not install power cables while the power is on.
Connecting the Channel Ports
1. Connect a ber optic cable to the DWDM SFP/SFP+ transceiver, or other WDM devices.
2. Connect the other end of the ber optic cable to the channel ports of Mux Demux.
3. Check if the indicators light is green.
7