Connecting The Power - FS S1900-16TP Guide De Démarrage Rapide

Connecting the Power

Z
0 V 5 6 /6 0 H
A C 1 0 0 -2 4
1. Plug the AC power cord into the power port on the back of the switch.
2. Connect the other end of the power cord to an AC power source.
WARNING: Do not install power cable while the power is on.
Connecting the RJ45 Ports
1. Connect an Ethernet cable to the RJ45 port of a computer, printer, network storage, or other
network devices.
2. Connect the other end of the Ethernet cable to the RJ45 port of the switch.
8