Description Of Symbols - Triton TPT 125 Instructions D'utilisation Et Consignes De Sécurité

Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product. This
product has unique features and, even if you are familiar with similar products, it is necessary to read this manual carefully to ensure you
fully understand the instructions. Ensure all users of the tool read and fully understand this manual.

Description of Symbols

Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Read instruction manual
Wear protective clothing
Class I construction (protective earth)
DO NOT use in rain or damp environments!
WARNING: Moving parts can cause crush and cut injuries.
Be aware of kickback!
For indoors use only!
Environmental Protection
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
WARNING
LIFTING HAZARD
Single Person Lift could cause injury
Use assistance when moving or lifting
WARNING: This product is heavy and as a precaution it is advised
that two people assemble the machine.
Conforms to relevant legislation and safety standards.
GB
4
Original Instructions
Specification
Model number:
Voltage:
Power:
Cuts per min:
No load speed:
Planing height:
Planing width:
Table size:
Insulation:
Weight:
Note: Imperial conversions are approximate.
Sound and vibration information:
Sound pressure LPA:
Sound power LWA:
Uncertainty K
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable,
even with ear protection, stop using the tool immediately and check the ear
protection is correctly fitted and provides the correct level of sound attenuation
for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to
a chronic condition. If necessary, limit the length of time exposed to vibration
and use anti-vibration gloves. Do not operate the tool with hands below a
normal comfortable temperature, as vibration will have a greater effect. Use
the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal use
for the tool in normal working conditions. A poorly maintained, incorrectly
assembled, or misused tool, may produce increased levels of noise and
vibration. www.osha.europa.eu provides information on sound and vibration
levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
TPT125
EU: 220-240V~, 50/60Hz
SA: 220-240V~, 50/60Hz
AU: 220-240V~, 50/60Hz
EU: 1100W
SA: 1100W
AU: 1100W
17500min
-1
8750min
-1
3.2 - 152mm ( ⁄ - 6")
1
8
317mm / 12 ⁄ "
1
2
317mm (12 ⁄ ") x 320mm (13")
1
2
29kg (63.9lbs)
90.9dB(A)
103.9dB(A)
3dB
Creation date: 10 August 2015 4:06 PM