Hendi 205914 Mode D'emploi page 8

After use
• Switch OFF the appliance by pressing the main
switch (1) to the "0" position and unplug the ap-
pliance.
• Remove the frying grid (7) from the oil container
(5). This avoids the frying grid (7) becoming stuck
in the solidified fat.
• Overturn the frying grid holder (8) & place it on
the top of oil container (5) with 4 raised stoppers
(see picture) in the right position.
Cleaning and maintenance
• Always remove the plug from the socket and let
it cool down completely before cleaning the ap-
pliance.
• Beware: Never immerse the appliance in water
or any other liquid!
• Clean the outside of the appliance with a damp
cloth (water with mild detergent).
• Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.
Technical specification
Protection class: Class I
EN
Waterproof protection class: IPX3
Item Dimension after placing
the frying grid holder
205914
8
Capacity
[mm]
630x860x(H)360
Do not use petrol or solvents! Clean with a damp
cloth and detergent if necessary. Do not use
abrasive materials.
• Do not clean the appliance with steam cleaner
or water jet.
• Assemble the appliance after cleaning and make
sure that the heating & control panel is mounted
properly, otherwise the appliance will not func-
tion.
Rated Temperature
[l] wattage
[W]
12 3500
Operating
range voltage
[°C] [V]
50 – 190 230
Total net
weight
[kg]
16,3