Choosing The Correct Tip For Smt Removal - Metcal MX-500 Manuel D'utilisation

CHOOSING THE CORRECT TIP CARTRIDGE FOR SMT REMOVAL
CHOOSE THE CORRECT GEOMETRY
First, measure the dimensions of your component. Then, using the SMTC charts which
are available from your local distributor or on Metcal' s web page (www.metcal.com),
look up your component description, and cross match it to the dimensions listed
(sometimes components with the same description can have different dimensions). If
this doesn't work, try looking up the dimensions of other types of components; one of
them may work.
The tip you choose must match your component. A "near fit" is not good enough for
most applications. The leads must be contacted on all sides, ensuring even
performance.
S L O T T U N N E L Q U A D Q U A D D U A L Q U A D *
THE SIMPLEST WAYS TO GET THE RIGHT TIP
Many customers have said that measuring their components and matching them up to
a chart can be difficult. That' s why Metcal developed the SMTC Tip Template Guide.
The SMTC Tip Template is a series of ESD-safe, clear plastic templates in an easy-to-use
book. Look up what type of component you have, and turn to one of our templates. Lay
the template over the component, and, if it fits and has the correct lead count, you've
found your tip. There' s also an outline of each tip at the edge of the template, so you can
turn the template and "try out" the tip on the component.
In addition, Metcal has a "tip picker" software program that may be of use to you.
Contact your distributor or www.metcal.com for more information.
If you are still having problems, your local Metcal Distributor or Representative can
help. Please give them a call.
CHOOSE THE CORRECT SERIES
Each Metcal cartridge is specially designed to deliver high power in response to loads.
For this reason, you can often rework with a Metcal cartridge at a temperature 100°F
or more lower than with a conventional iron. In Metcal' s tip listing, the recommended
Series is included in its own column. If you think you need a different series than
recommended, call your Metcal Distributor or Representative.
5
Copyright © 1998, Metcal, Inc. All Rights Reserved 7027-0400 Rev A