Cleaning Instructions; External Surfaces Of The Spirometer - CareFusion MicroLoop Manuel D'utilisation

Cleaning Instructions

Disinfection of contaminated parts is only effective after having them
carefully pre-cleaned. CareFusion recommend the tested solution of
PeraSafe sterilizing powder (36-SSC5000A) for pre-cleaning and
disinfection. If a different solution is used, please follow the given
manufacturer's instructions.
The device must not be wiped with any aqueous solutions and must
not be exposed to solvents e.g. alcohol, chloride solutions as there
are electronic components inside that will be permanent damage.
CAUTION: Switch off the device and always unplug your MicroLoop
before cleaning.

External Surfaces of the Spirometer

CAUTION: Do not attempt to wash or immerse the MicroLoop
transducer housing in water or cleaning fluid, as there are electronic
components inside that will be permanently damaged.
The external housing of the spirometer may be wiped with sterile
wipes or a damp cloth that has been immersed in a cold sterilising
solution.
CAUTION: Do not wipe the touch screen.
80