Servicing - CareFusion MicroLoop Manuel D'utilisation

4. After cleaning/disinfecting, the transducer should be rinsed
briefly in distilled water and dried.
5. Re-assemble the mouthpiece holder
Housing
Turbine transducer
Cut-out
Locating pip
CAUTION: Do not attempt to wash or immerse the MicroLoop
transducer housing in water or cleaning fluid, as there are electronic
components inside that will be permanently damaged.

Servicing

There is no routine maintenance required for the MicroLoop and
there are no user serviceable parts in this instrument. Please return
the unit to CareFusion or an authorised agent if servicing is required.
If your unit requires service or repair please see page 99 for contact
details.
82