CareFusion MicroLoop Manuel D'utilisation page 80

The batteries will take approximately 4 hours to become fully
charged.
Note: Turn off the mains supply or remove the MicroLoop from the
charger once the battery display shows fully charged. Laving the
MicroLoop on charge in the cradle may diminish the battery life.
Note: Use only the AC adapter supplied. Use of any other type may
cause permanent damage to the MicroLoop and cause a fire or
electrical hazard. Do not plug in and remove the power lead from
the AC adapter repeatedly.
Please Note: Dispose of the waste battery in accordance with EU
Waste Battery Regulations.
78