Auxiliary Function Programming; Miscellaneous Key Programming; Programming For - Sharp XE-A303 Manuel D'instructions

AUXILIARY FUNCTION PROGRAMMING

Miscellaneous Key Programming

1
The cash register provides miscellaneous keys such as
Miscellaneous keys are programmed in one procedure with guidance messages except for the
• To keep current setting on each programming, press the
guidance message is firstly displayed.
• When pressing the
data you entered before the press of
• When pressing the
the data you entered before pressing the
• When pressing the department, PLU,
middle of procedure except while entering texts or prices, the programming will move to the
pressed key programming.

Programming for

1. Specify the key to program.
-
(1) Press the
On the upper line of the display, immediately after
displaying "(-) PROGRAMMING", guidance message
for the next step will be displayed.
On the lower line of the display, the corresponding
function no. will be displayed.
2. Text programming (Press
:
(1) Press key to enter text programming.
On the upper line of the display, immediately after
displaying guidance message, the current text data
will be displayed.
On the lower line of the display, the character code
corresponding to the first character of the text data
will be displayed.
(2) Enter the text.
A maximum of 12 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
S
Use the and
text data.
P
Pressing the
the right and left respectively.
52
A
key in the middle of procedure, the programming will terminate and the
l
key twice in the middle of procedure, the programming will terminate and
-
-
to enter programming.
s
to skip. / Press
B
keys to delete unnecessary
@
and key moves the cursor to
- % & V r
, , , ,
s
A
is saved.
l
key twice is NOT saved.
- % & V r
, , , , ,
Key operation
A
to terminate.)
(-)
R X Y c b
, , , , ,
A
key when the corresponding
R X Y c b
, , , or
Operator display
-
(-) PROGRAMMING
01
ENTER[00]KEY
01
:
ENTER TEXT
01
=(=-=)
01
(-) _
S S
01
A
and .
key.
key in the
0.00
0.00
0.00
040
032