Reading Stored Programs - Sharp XE-A303 Manuel D'instructions

Date setting for EURO modification operation
s
Key operation example
• In case you changed the date format using job code 61, follow the format you selected for setting
the date.
• If all zeros are set, this programming is disabled.
• If you have already made the Job #800 operation with the substitution of 3 for "A" in the X2/Z2
mode, this programming is disabled.
Time setting for EURO modification operation
s
Key operation example
• If you have already made the Job #800 operation with the substitution of 3 for "A" in the X2/Z2
mode, this programming is disabled.

Reading Stored Programs

5
The machine allows you to read every program stored in the PGM mode.
Key sequence for reading stored program
Report name
Programming report 1
Programming report 2
Auto key programming report
Printer density programming report
Department programming report
PLU programming report
To stop reading programming report, turn the mode switch to the MGR position.
80
13 @
s @
13
s
01072009
A
14 @
s @
14
s
10
A
To set all zeros
Date (Day-Month-Year)
(seven or eight digits)
Time (Hour) (00-23)
Key sequence
A
2 A
1 A
3 A
4 A
@
Start PLU code
s A
Print
s A
Print
End PLU code
p