Auxiliary Function Programming; Miscellaneous Key Programming - Sharp XE-A213 Manuel D'instructions

AUXILIARY FUNCTION PROGRAMMING

Miscellaneous Key Programming

1
The cash register provides miscellaneous keys such as
Miscellaneous keys are programmed in one procedure with guidance messages except for the
• To keep current setting on each programming, press the
guidance message is firstly displayed.
• When pressing the
data you entered before the press of
• When pressing the
the data you entered before pressing the
• When pressing the department, PLU,
of procedure except while entering texts or prices, the programming will move to the pressed key
programming.
Programming for
1. Specify the key to program.
-
(1) Press the
Immediately after displaying "(-) PROGRAMMING",
guidance message for the next step will be displayed.
2. Text programming (Press
:
(1) Press key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
(2) Enter the text.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 14 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
P
Pressing the
the right and left respectively.
s
(3) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
3. Amount programming (Press
(1) Enter the amount using numeric keys.
A maximum of 6 digits can be set.
Default setting is 0.
52
A
key in the middle of procedure, the programming will terminate and the
l
key twice in the middle of procedure, the programming will terminate and
-
-
to enter programming.
s
to skip. / Press
@
and key moves the cursor to
key to register the text.
s
to skip. / Press
- % V r
, , , ,
s
A
is saved.
l
key twice is NOT saved.
- % V r o
, , , , ,
Key operation
A
to terminate.)
A
to terminate.)
o X Y c b
, , , , and
A
key when the corresponding
X Y c b
, , or key in the middle
Operator display
-
(-) PROGRAMMING
ENTER[00]KEY
:
ENTER TEXT
=(=-=)
(-)
(-)
s
ENTER AMOUNT
300
A
.
key.
-0.00
300