Sharp XE-A303 Manuel D'instructions page 56

6. Discount calculation (for the subtotals) programming (Press
(1) Go to (2) when the discount calculation for the
subtotals does not need to be changed from "SBTL
ENABLE". Otherwise, press
"SBTL DISABLE".
:
Each time
"SBTL DISABLE" and "SBTL ENABLE" alternately.
Default setting is "ENABLE".
s
(2) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
7. Entry digit limit programming (Press
(1) Enter entry digit limit using numeric key.
The entry digit limit can be set up to 8.
Default setting is 8.
The entry digit limit is in effect for the REG mode
operations but can be overridden in the MGR mode.
The entry digit limit is represented by the number of
allowable digit for the maximum entry amount for
discount key. When "0" is set, open price entry is
prohibited.
s
(2) Press the
8. Terminate programming
A
(1) Press the
programming.
Item:
A Discount calculation
(for the items)
B Discount calculation
(for the subtotals)
C Entry digit limit
54
:
key to display
key is pressed, the display shows
key to register the setting.
key to register the setting.
key to terminate the
s
to skip. / Press
-
key
Selection:
Enable*
Disable
Enable*
Disable
s A
to skip. / Press
s
LIMIT DIGITS
01
A
to terminate.)
LIMIT DIGITS
7
01
s
ENTER[TL/NS]KEY
A
Print
Text
Sign
Print:
0
1
0
1
0-8(default:8)
to terminate.)
8
7
0.00
PGM
0.00
From left, ABC
Amount