Sharp XE-A303 Manuel D'instructions page 26

6.
Function programming (Press
(1) Go to (2) when the function does not need to be
changed from "PLU". Otherwise, press
display "SUBDEPT".
:
Each time
"SUBDEPT" and "PLU" alternately.
Choose "PLU" for using the PLU code as PLU and
"SUBDEPT" for using the PLU code as
subdepartment.
Default setting is "PLU".
s
(2) Press the
On the upper line of the display, immediately after
displaying the current text data for the next PLU,
guidance message will be displayed.
On the lower line of the display, the corresponding
PLU code will be displayed.
The PLU code is automatically incremented for a
new PLU programming, and ready for text
programming for the incremented PLU code.
To program for the incremented PLU code, return to the step 2.
When you want to program for other than incremented PLU code, return to the step 1.
7.
Terminate programming
A
(1) Press the
Sign
• In case negative is programmed for a PLU/subdepartment whose associated department is positive
department, the PLU/subdepartment serves as a coupon PLU/subdepartment, and split price entry is
disallowed for the PLU/subdepartment. It is invalid to program positive for a PLU/subdepartment whose
associated department is negative.
24
s
to skip
key is pressed, the display shows
key to register the setting.
key to terminate PLU programming.
A
. / Press to terminate.)
:
key to
PLU code
Item name
s
PLU.0072
0072
ENTER[00]KEY
0072
A
Print
PLU/subdept. 1/0
Unit price
Associated dept.
0.00
0.00
PGM
0.00