Function Of The Keys - Renkforce AN-8006 Notice D'emploi

Function of the keys

• Station buttons 1-6 (15)
Brief press > direct selection of a previously saved station.
Long press > the currently received station is saved on the respective station button.

Each of the three FM bandwidths (FM1-3) and also the two MW bandwidths (MW1-2) has six station
buttons. Therefore you can assign 30 station buttons.
• Button 8 / AF/REG (10)
Brief press > AF function is activated/deactivated.
"AF" will be displayed if the function is activated. If the reception of an RDS transmitter station gets weaker or the radio
does not receive and RDS station at all, the display flashes. When a station can be received well, the symbol is
displayed continuously.
When an RDS station is being received, the name of the station is displayed.
When you leave a transmission area, the radio can only switch to a better sender when the AF function is activated.
Long press > region ID is activated/deactivated.
Press the AF/REG button (10) for about 2 seconds until the display shows REG ON or REG OFF. When you press
the button once more, you switch between these two modes. The normal display reappears automatically after a few
seconds.
If REG ON is on and the reception gets weaker, the radio only switches to a different frequency with exactly the same
program.
When the regional identification is off (REG OFF), and the reception gets weaker, the radio switches to a different
transmitter station with the same regional identification.
71