Connecting The Loudspeakers And The Power Supply - Renkforce CD-7630 Notice D'emploi

Connecting the loudspeakers and the power supply

The CD tuner has an ISO system plug.
Vehicles equipped with such a system plug can be connected directly to the device if the pin assignment is the same
(please check before connection). If the assignments are different, you need to connect the device using an adapter.
Please see the following illustrations for the contact assignment of the CD tuner socket.
Ask your car dealer for the assignment of your vehicle system plug.
System plug B (loudspeaker connection)
(1) Loudspeaker rear right (+)
(2) Loudspeaker rear right (-)
(3) Loudspeaker front right (+)
(4) Loudspeaker front right (-)
(5) Loudspeaker front left (+)
(6) Loudspeaker front left (-)
(7) Loudspeaker rear left (+)
(8) Loudspeaker rear left (-)
System plug A (power supply)
(1) Not assigned
(2) Not assigned
(3) Not assigned
(4) Continuous current +12 V
(5) Aerial control output
(6) Not assigned
(7) Ignition +12 V
(8) Earth
48

3
1
B
2 4
4
A
Operating Instructions
English
5 7
6 8
5 7
8