Renkforce AN-8006 Notice D'emploi page 83

Saving numbers in the phone number memory:
• Select PRE NUM.
• Press the volume control / dial control (23).
• Twist the button volume control/dial control (23) until the desired memory slot (1-6) is displayed.
• Press the volume control / dial control (23) again.
• The display shows PHONE <- to display the memory readiness.
• Enter the number to be saved with the numerical buttons.
• Press the button volume control/dial control (23) to save the number.

Press the button
If a number is saved in a slot which already contains a number, the old number is deleted.
Dialling from the menu:
• While a number is shown on the display (from the menu PRE NUM, RECV, DIAL or MISS), this number can be
dialled directly by pressing the button
Switching between automatic and manual call accept:
• Select AUTO ANS or MANU ANS by turning the button volume control/dial control (23).
AUTO ANS: The hands-free equipment establishes the connection to the incoming call automatically.
MANU ANS: The connection to an incoming call must be established manually with the button
Volume control of the hands-free equipment
• Select TALK 29 (this number may deviate, it shows the current volume setting).
• Twist the button volume control/dial control (23) until the desired volume setting is displayed.
/AMS (21) while entering the phone number to make corrections.
(22).
(22).
83