Connecting The Loudspeakers To The Power Supply - Renkforce AN-8006 Notice D'emploi

Connecting the loudspeakers to the power supply

The CD tuner has an ISO system plug.
Vehicles equipped with such a system plug can be connected directly to the system if the plug assignment is the same
(please check beforehand!). If the assignment differs, please connect the CD tuner to an adapter.
Please refer to the following illustrations for the contact assignment of the CD tuner socket.
Please ask you car dealer for the respective assignment of your vehicle system plug.
System connector B (loudspeaker connection)
(1) Loudspeaker rear right (+)
(2) Loudspeaker rear right (-)
(3) Loudspeaker front right (+)
(4) Loudspeaker front right (-)
(5) Loudspeaker front left (+)
(6) Loudspeaker front left (-)
(7) Loudspeaker rear left (+)
(8) Loudspeaker rear left (-)
System plug A (power supply)
(1) (not assigned)
(2) (not assigned)
(3) (not assigned)
(4) Continuous current +12V
(5) Aerial control output
(6) (not assigned)
(7) Ignition +12V
(8) Ground
60
Operating Instructions

English
3
1
B
2 4
4
A
5 7
6 8
5 7
8