Installation Into The Radio Recess - Renkforce AN-8006 Notice D'emploi

Installation into the Radio Recess

• Remove the two safety screws of the CD drive.
• Remove the front control panel.
• Carefully remove the plastic frame in the front of the system, by bending it slightly to the outside and pulling it off
from the unit.
• Unlock the installation frame with the two unlocking keys.
• Remove the installation frame towards the back of the system.
• Insert the frame into the respective cut-out in the vehicle.
• Bend down some clips in the installation frame until the frame is securely fastened in the recess.
55