Operation; Display - switel DET207 Mode D'emploi

4

Operation

4.1

Display

Display Description
Continuously on: The connection to the base station is
good.
Flashing: The connection to the base station is poor.
Indicates the current battery charge status.
You have activated the Handset ringer" menu.
You have activated the Base ringer" menu.
You have activated the Flash time" menu.
You have activated the Tone − Pulse dialling" menu.
You have activated the Register handset" menu.
There are more numbers in the full call number to the left or
right. Press the O button to display them.
The ringing tone has been switched off.
The key lock function is switched on.
You are scrolling through the phone book.
A call is currently being made or it flashes when a call is
received.
The microphone is deactivated during a call.
In standby: New calls have been stored in the calls list
(CLIP). In the calls list: The phone number has already
been viewed.
In the caller list: The phone number has not been viewed.
A new message has been recorded. (Optional service offe-
red by your telephone network provider, refer to Chapter
4.14)
118
− Operation −