Safety Information; Intended Use; Installation Location; Power Supply - switel DET207 Mode D'emploi

1

Safety Information

Please read this operating instruction manual thoroughly.
1.1

Intended use

The telephone is suitable for telephoning within a public telephone
network system. Any other use is considered unintended use.
Unauthorised modification or reconstruction is not permitted. Under no
circumstances open the device or complete any repair work yourself.
1.2

Installation location

The telephone is designed for use indoors in rooms with a temperature
range from 10 °C to 30 °C. The base station should not be used in rooms
exposed to moisture, such as bathrooms or laundries. Prevent excessive
exposure to smoke, dust, vibration, chemicals, moisture, heat and direct
sunlight. Position the base station with a distance of 1 m to other
electronic devices or there is a risk of mutual disturbance.
Do not use the handset in potentially explosive areas.
1.3

Power supply

Only use the power adapter plug supplied because other
power supplies could destroy the telephone. Ensure access to
the power adapter plug is not obstructed by furniture or such.
1.4

Telephone connection cable

If the telephone connection cable supplied needs to be replaced, ensure
the pin assignment is identical on the new one.
1.5

Rechargeable batteries

Do not throw batteries into a fire or immerse them in water.
1.6

Power failure

The telephone cannot be used to make calls in the event of a power
failure. Always keep a cord connected telephone which operates without
an external power supply available in case of emergency situations.
1.7

Private branch exchanges

The telephone can be connected to a private branch exchange. There is
no guarantee that the telephone will work on every private branch
exchange.
112
− Safety Information −