Operation; Weighing; Weighing With Tare - KERN and SOHN GAB-N Mode D'emploi

10 Operation

10.1 Weighing

 Turn on the scales by pressing the ON/OFF button
9.9.9.9

0.0
GROSS
ZERO
 When required, the scales can be reset to zero at any time
Printout example:
N 0.500 kg

10.2 Weighing with tare

 Deposit weighing receptacles
123�
GROSS
 After successful stop check press the
(Example)

0.0
NET
 When the weighing container is removed, its weight will be
- 123.4
NET
ZE RO
 The taring process can be repeated any number of times,
 To delete the tare value, remove load from weighing plate
0.0
GROSS
ZERO
GAB-N-BA-e-1817
underneath the scales on the right.
The balance will carry out a self-test. The balance is ready for
weighing when the weight display „0.0" appears.
0
using .
The zero display and the symbol NET will appear.
The weight of the container is now internally saved.
shown as a negative value.
e.g. when adding several components for a mixture (adding).
The limit is reached when the whole weighing range is
exhausted.
TARE
and press .
TARE
button.
23