_______________________________________________________________
5
Operating and
adjusting
5.1 Safety instructions
The Universal Lockers product should only be
used and operated in faultless condition and in
compliance with the instructions in the operating
manual.
Prior to storing objects in the Universal Lockers
product:
■
Ensure that the Universal Lockers product has
been assembled in accordance with the
provided assembly instructions.
■
Ensure that the maximum permissible load-
bearing capacity of the Universal Lockers
product is not exceeded.
Risk of injury and damage.
When loading the assembled Universal
Lockers product or its accessories with a
weight higher than the approved weight,
the fastening screws may tear.
Comply with the permissible weight.
CAUTION
Possible damage to the Universal
Lockers product.
Check that the Universal
Lockers product has been
properly assembled and
mounted.
5.2 Opening and closing the
lockers
Further detailed information regarding
use, resetting or servicing the locks can
w w w .steelcase.com ->
be found under
Design R esources-> Docum ents ->
Search for: Lockers Collection
8
5.2.1 If shared:
Locking:
Fig.: 5-1: Shared user code
Fig.: 5-2: Master key
Fig.: 5-3: RFID card
.
Operating and adjusting
Close door.
Press C.
1a
Enter a 4 to 7 digit code.
Press key.
Turn the switch clockwise to the
1b
"closed" position.
Close door.
1a
Insert valid master key.
Turn the switch clockwise to the
1b
"closed" position.
Close door.
1a
Press key and hold RFID card in front
of sensor.
134917