Memory Function; Combinations; Convection And Microwave - Rotel U1541CH Mode D'emploi

• MEMORY FUNCTION
This function allows you to store a function that is used particularly frequently.
o
1. Press the Memory button (5). A number "1" will flash on the display.
2. Enter the setting you want to store. To do this, follow the same procedures al-
ready described in this manual. For example: You would like to set microwave
power of 70% for a time of 1:30.
Press the microwave button (4) until you see P 70.
§
Turn the timer knob (11) to the right until you see 1:30.
§
3. Press the Memory button (5) and the setting is now stored.
4. The word "memory" will now appear in small font above the specified time.
5. Put the dish in the microwave.
6. Press the Memory button (5) and then the Start button (10).
7. The stored setting will activate automatically.
To change the stored setting, follow the same steps described above.
o
If the power supply is interrupted, the stored setting will be deleted.
o

• COMBINATIONS

C - 1 : Convection and Microwave
You use this combination to roast and bake, etc. The appliance switches between
o
microwave and convection mode (230°C convection + 40% microwave). Do not use
any metal cookware.
1. Place the food to be cooked in the appliance and close the door.
2. Press the Combi button (6) until the symbol (C-1) appears on the display.
3. Turn the timer knob (11) to the right until you see the cooking time you want.
You can set from a minimum of 10 seconds to a maximum of 60 minutes.
4. Press the Start button (10) and the programme starts.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
68