Operation - LawnMaster HT2201 Mode D'emploi

OPERATION

WARNING
Do not allow familiarity with this product to make you careless. Remember that a careless
WARNING
Always wear safety goggles or safety glasses with side shields when operating power tools.
Failure to do so could result in objects being thrown into your eyes, resulting in possible serious
injury.
WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious personal
injury.
CONNECTING TO POWER SUPPLY
This product is designed with a cord retainer that prevents the extension cord from being pulled
loose while using.
Form a loop with the end of the extension cord.
Insert loop portion of extension cord through opening in the bottom of the rear handle and place
over cord retainer.
Slowly pull loop against cord retainer until the slack is removed. (Fig.3)
Plug product into extension
NOTE: Failure to remove all excess cord slack from extension cord retainer could result in plug loosening from
receptacle.
Fig.3
2
cord.
1
Cord retainer
Extension cord
12
3