Tv Setup; Setup; Confi Guration; Ac3 Audio - Finlux 22FLD850 Manuel De L'utilisateur

or the TV terminal may be damaged if the CAM
is forcefully inserted.
• Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
• Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Conditional Access then pressing the
OK button. (CAM set up menu is not displayed
when it is not required.)
• To see the viewing contract information:
enter IDTV; press the " MENU " button, then
highlight Conditional Access and press the
OK button.
• When no module is inserted, "No Conditional
Access module detected" message appears
on the screen.
• Refer to the module instruction manual for
details of the settings.
NOTE: Insert or remove the CI module only when the
TV is in STAND-BY mode or SWITCHED OFF.

TV Setup

You can use this item to display TV functions.
The digital TV Setup menu screen is accessed
from the main menu. Press the "MENU" button
to display the main menu and use " " or " "
button to highlight "TV Setup", press the OK
button to display TV Setup menu screen.
You can fi nd detailed information for all menu
items in "Analogue TV Menu System" section.

Setup

The adjustments in this menu are given as the
following:
Confi guration
You can confi gure the settings of your TV. Select
Confi guration from Setup menu and press OK
to view this menu. Press the EXIT button on the
remote control to exit.
AC3 Audio (**for continental Europe country
options only)
In the Confi guration Menu, highlight the AC3
Audio item by pressing " " or " " buttons. Use
the " " or " " buttons to set the AC3 Audio as
On or Off.
If the channel that you are watching supports
AC3 Audio, turn this setting on.
Hard of Hearing (**for continental Europe

country options only)

Use " " or " " button to select Hard of Hearing
and then press " " or " " button to set this
setting as On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting
as On to receive such signals.

Favourite Mode

Use this function to enable or disable favourite
mode. Press " " or " " button to set this function
as on or off.

Channel List

Use " " or " " buttons to go to Channel List
option. Use " " or " " buttons to toggle Channel
List Mode. If you select "TV Only", with the "
" or " " buttons, you navigate through only TV
channels. If you select "Radio Only", with the " "
or " " buttons, you navigate through only radio
channels. If you select "Text Only", with the " "
or " " buttons, you navigate through only text
channels. To save the recent changes and exit;
press the "M" button.
English - 30 -