Balance; Headphone; Volume; Sound Mode (Optional) - Finlux 22FLD850 Manuel De L'utilisateur

Press " " or " " button to change the preset.
In equalizer menu, the preset can be changed
to Music , Movie , Speech , Flat , Classic and
User .
Select the desired frequency by pressing "
" or " " button and increase or decrease the
frequency gain by pressing " " or " " button.
Press the " MENU " button to return to the
previous menu.
Note : Equalizer menu settings can be changed only
when the Equalizer Mode is in User .

Balance

This setting is used for emphasizing left or right
speaker balance.
Press " " or " " button to select Balance.
Press " " or " " button to change the level of
the balance. Balance level can be adjusted
between -32 and + 32.

Headphone

Press " " or " " button to select Headphone .
Press " " button to view the headphone
menu.
Headphone sub-menu options are described
below:

Volume

Press " " or " " button to select Volume . Press
" " button to increase headphone volume
level. Press " " button to decrease headphone
volume level. Headphone volume level can be
adjusted between 0 and 63 .

Sound Mode (optional)

Press " " or " " button to select Sound Mode .
Using " " or " " button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.

AVL

Automatic Volume Limiting (AVL) function
adjusts the sound to obtain fi xed output level
between programmes (For instance, volume
level of advertisements tend to be louder than
programmes).
Press " " or " " button to select AVL . Press " "
or " " button to set the AVL as On or Off .

Spdif Out

Press " " or " " button to select Spdif Out .
Press " " or " " button to set the Spdif Out .
as On or Off .
Note : If Spdif Out is set to On, headphone will be
disabled.

SRS TruSurr XT (optional)

By pressing " " or " " select SRS TruSurr XT .
Press " " or " " button to set SRS TruSurr XT
as on or off.

Effect

If you are watching a mono broadcast, set Effect
on to obtain a better sound effect which will be
more stereo-like. If the current sound system is
stereo, switching this effect on will give a more
spatial effect.
Press " " or " " button to select Effect. Press
" " or " " button to set as On or Off .

Store

Press " " or " " button to select Store. Press "
" or OK button to store the settings. " Stored... "
will be displayed on the screen.
English - 39 -