Conditional Access; Tv Setup; Setup - Finlux 32FLHD845 Manuel De L'utilisateur

Channel : " " or " " keys navigate the user
through the TV or Radio list.
Date : Starting date is entered via Left/Right or
numeric buttons.
Start : Starting time is entered via Left/Right or
numeric buttons.
End : Ending time is entered via Left/Right or
numeric buttons.
Duration: Duration between Start and End
time.
Repeat: You can set a timer to be repeated as
Once, Daily or Weekly.
Change/Delete : permits or prohibits any
modifi cations for other users.
You can save the adjustments by pressing
GREEN button or cancel the process by
pressing RED button. You can edit the list via
GREEN button and delete with RED button.

Conditional Access

• Press M button to display the main menu
and use the " " or " " button to highlight the
"Conditional Access" line and press the OK
button:
Some Digital Terrestrial channels operate
on a Pay Per View basis. These require a
subscription and a hardware decoder.
Obtain the Conditional Access Module (CAM)
and the viewing card by subscribing to a pay
channel company, then insert those to the TV
using the following procedure.
• Switch off the TV and unplug from the
mains.
• Insert the CAM, then viewing card to the slot
that is located in the terminal cover at the left-
hand side of the TV (from front view).
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM
or the TV terminal may be damaged if the CAM
is forcefully inserted.
• Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
• Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Conditional Access then pressing the
OK button. (CAM set up menu is not displayed
when it is not required.)
• To see the viewing contract information:
enter IDTV; press the " M " button, then
highlight Conditional Access and press the
OK button.
• When no module is inserted, "No Conditional
Access module detected" message appears
on the screen.
• Refer to the module instruction manual for
details of the settings.
NOTE: Insert or remove the CI module only when the
TV is in STAND-BY mode or SWITCHED OFF.

TV Setup

You can use this item to display TV functions.
The digital TV Setup menu screen is accessed
from the main menu. Press the "M" button to
display the main menu and use " " or " " button
to highlight "TV Setup", press the OK button to
display TV Setup menu screen.
You can fi nd detailed information for all menu
items in "Analogue TV Menu System" section.

Setup

The adjustments in this menu are given as the
following:
English - 29 -