Basic Operations; Operation With The Buttons On The Tv; Volume Setting; Programme Selection - Finlux 22FLD850 Manuel De L'utilisateur

Basic Operations

You can operate your TV using both the
remote control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

• Press " " button to decrease volume or
button to increase volume, so a volume
level scale (slider) will be displayed on the
screen.

Programme Selection

• Press " P/CH + " button to select the next
programme or " P/CH - " button to select the
previous programme.

Viewing Main Menu

• Press V+/V- buttons at the same time to view
main menu. In the Main menu select sub-
menu using " P/CH - " or " P/CH + " buttons and
enter the sub-menu using "
buttons. To learn the usage of the menus, refer
to the menu system sections.

AV Mode

• Press the " TV/AV " button in the control panel
on the TV to switch between AV modes.
Note: Buttons on the TV set will play an operation
sound when pressed. This sound cannot be muted
(applies to Thinlux models).

Operation with the Remote Control

• The remote control of your TV is designed
to control all the functions of the model you
selected. The functions will be described in
accordance with the menu system of your
TV.
• Functions of the menu system are described
in the following sections.
Volume Setting
• Press "
Press "
A volume level scale (slider) will be displayed
on the screen.
Programme Selection (Previous or Next
Programme)
• Press " P/CH - " button to select the previous
programme.
• Press " P/CH + " button to select the next
programme.

Programme Selection (Direct Access)

• Press numeric buttons on the remote control
to select programmes between 0 and 9. The
TV will switch to the selected programme.
To select programmes between 10 - 299
(for IDTV) or 10-199 (for analogue), press
the numeric buttons consecutively (e.g. for
programme 27, first press 2 and then 7).
When the pressing time is due for the second
numeric button, only the fi rst digit programme
will be displayed. The limit of the delay time
is 3 seconds.
• Press directly the programme number to
reselect single digit programmes.
Digital TV Mode

Initial Settings

IMPORTANT: These instructions
" or " "
provided until the section "Analogue TV
Mode Menu System" is only applicable
for DIGITAL TV models.
When the TV set is operated for the fi rst time,
the TV switches to IDTV mode.
Because this is the fi rst time the TV is used,
there are no channels stored in the memory.
When the TV is turned on for the fi rst time, the
menu for the language selection appears on the
screen. The message "Welcome please select
your language!" is displayed in all language
options sequentially in the OSD:
By pressing the " " or " " buttons highlight the
language you want to set and press OK button.
After then, "First time installation" OSD will
appear on the screen. By pressing " " or " "
English - 23 -
" button to increase the volume.
button to decrease the volume.