Instructions; Surrounding Space - Wamsler W3-50 Instructions De Montage Et D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Height adjustment:
1. Remove the base cover
2. The height-adjustable feet are accessible by removing the fuel truck
3. With the help of an Allen key (size 5) or a fork key (size 17mm), the stove
can be adjusted to the desired height / into the water
4. Depending on the height order (850 / 900 / 920 mm), the matching cover is
included
1.3

Instructions

For installation and for connection of flue, the requirements of the Fire Regulations
(FeuVO in Germany) apply, as well as local building regulations such as the following
technical standards DIN 4705, DIN EN 13384, DIN 18160, DIN EN 1856-2 and DIN EN
15287. In order for the stove to function correctly the chimney to which you want to
connect the stove must be in good condition.
1.4

Surrounding space

The stove draws the air required for burning from the surrounding room. You must
ensure that sufficient air can be drawn in through non-sealed windows and outside
doors. In addition you must ensure that a room volume/heat capacity ratio of at least 4
m³ per kW nominal heat capacity is available. If the volume is less than this, then air
vents can be used to provide access to further air supply in other rooms (connecting
vents min. 150 cm²).
31

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

W3-90

Table des Matières