Side Connection (Fig. 1) - Wamsler W3-50 Instructions De Montage Et D'utilisation

1.8.2

Side connection (Fig. 1)


Remove the rear flue outlet (1) by loosening the screws.

Remove the cooking plate (2) and the fire bricks (3)

Remove the steel plate (4) in the exhaust

Bolt tight the cover (6) at the inside with the outside cover (7).

Swing back cover (8) upwards and close

Remove the side cover plate (10) by loosening the screws.

With a Stanley cut and remove the 3 holders of the insulation plate (11)

Loosen the screws in the side blank cover (12) and remove cover

Fasten flue outlet adapter (1) to the side panel and screw tight

Remove fire bricks from inside by taking of the screws

Replace the steel plate (4), the fire bricks (39 and the cooking plate (2)
The connection piece must not be fed through flammable construction materials or
furniture elements. When using a side connection, the safety distance from flammable
elements required by the manufacturer of the connection must be respected.
4
Fig. 1
2
9
3
6
5
7
8
36
1
13
11
12
10