Combustion Airflow Settings; Use; Controls For Use And Settings; Performance Regulator - Wamsler W3-50 Instructions De Montage Et D'utilisation

2.2

Combustion airflow settings

The settings must always be as shown.
Fuel
Lighting
Firewood
Lignite briquettes
Lignite briquettes
Not in use: do not add any more
fuel
Table 2
3.

Use

3.1

Controls for use and settings

3.1.1

Performance Regulator

3.1.2

Secondary air control / Air - logic

Primary
airflow
setting
Nominal
heat load
Nominal
heat load
Long-term
heating
The rate of combustion and therefore the heat delivered by the
stove are determined by the amount of air for combustion air
flowing under the grid. This primary air supply is set using the
performance regulator control.
1 - Closed
2 - Firewood
3 - Lignite
The secondary air regulator is on the inside of the frame, behind
the fire door. Choose the setting for the fuel.
1 - Firewood
2 - Lignite
Start damper
setting
39
Combustio
Secondary
n duration
airflow setting
approx. 1
approx. 2
approx. 12
in hrs
-
-