Wamsler W3-50 Instructions De Montage Et D'utilisation page 30

______________________________________________________________________
Disassembly / assembly of the W3-50 base cover
Dismantling
1. First pull the plinth cover slightly (approx. 1 cm) in front
2. Unhook the base panel at the rear on the right and the left side and pull it slightly
outwards (key-shaped opening "A")
3. Remove the base cover towards the front
Assembly
1. Install the base cover from the front
2. Slightly pull apart the plinth at the back on both sides and hang the bolt into the
opening
3. Push the base cover all the way back
______________________________________________________________________
30