MIRKA AP 300NV Instructions D'utilisation page 31

Mirka® AP 300NV 3,200 rpm Polisher )see "Product Configuration/Specifications" table for particular model(
to which this declaration relates is in conformity with the following standard(s) or other normative document(s) EN ISO 15744:2008. Following the
provisions of 89/392/EEC as amended by 91/368/EEC & 93/44/EEC 93/68/EEC Directives and consolidating Directive 2006/42/EC.
Jeppo 31.1.2017
Place and date of issue
Operator Instructions
Includes – Please Read and Comply, Proper Use of Tool,
Work Stations, Putting the Tool Into Service, Operating In-
structions, Product Configuration/Specifications Tables, Parts
Page, Parts List, Trouble shooting guide.
Manufacturer/Supplier
Mirka Ltd.
FI-66850 Jeppo
Finland
Tel: + 358 20 760 2111
Fax: +358 20 760 2290
Recommended Airline
Size - Minimum
10 mm 3/8 in
Declaration of conformity
Mirka Ltd.
FI-66850 Jeppo, Finland
declare on our sole responsibility that the product
Company
Important
Read these instructions care-
fully before installing, operating,
servicing or repairing this tool.
Keep these instructions in a safe
accessible location.
Required Personal Safety Equipment
Recommended Maximum
Hose Length
8 meters 25 feet
28
AP 300NV
77 mm Polisher
Stefan Sjöberg, CEO
Safety Glasses Breathing Masks
Safety Gloves Ear Protection
Air Pressure
Maximum Working Pressure
Recommended Minimum
6.2 bar 90 psig
NA NA
Original Instructions