Control Panel - Clarke Vantage 17 Battery Manuel D'utilisation

EN
ENGLISH

CONTROL PANEL

(See Fig. 4)
Charged Battery Indicator Light (Green) (A, Fig. 4)
When it turns on, it indicates that the batteries are charged.
Half-discharged Battery Indicator Light (Yellow) (B, Fig. 4)
When it turns on, it indicates that the batteries are half discharged.
Discharged Battery Indicator Light (Red) (C, Fig. 4)
When it turns on, it indicates that the batteries are discharged. Do not use the machine with discharged batteries, to avoid
damaging the batteries, but charge them (see the procedure in the Maintenance chapter).
Brush/Pad Rotation Switch (D, Fig. 4)
When it is turned to the "I" position, the machine is ready to start the brush/pad rotation. To start the brush/pad rotation, press
and hold one or both the activation switches (F, Fig. 4).
When it is turned to the "0" position, the brush/pad rotation is deactivated.
Water Vacuuming Switch (E, Fig. 4)
When it is turned to the "I" position, it starts the vacuuming of the recovery water.
When it is turned to the "0" position, it stops the vacuuming of the recovery water.
Activation Switches (F, Fig. 4)
When one or both the activation switches are pressed, the brush/pad rotation is activated.
The switches are active only if the brush/pad rotation switch (D, Fig. 4) is turned to the "I" position.
Figure 4
10 Operator's Manual - Vantage 17 Battery