Fountain Reassembly - Petsafe Drinkwell Platinum Manuel D'utilisation

FOUNTAIN DISASSEMBLY &
6) Next, remove the pump by disconnecting the inline plug (Fig.
2f), then lift it out of the fountain. Clean away any hair or food
that may have accumulated around the flow control knob and
the intake plate of the pump.
Fig. 2e
7) Clean the fountain parts with warm water and soap. You can
also put the fountain in the dishwasher (not the pump). Remove
the pump before placing in the dishwasher. It is recommended
that you turn down the heat of the dishwasher if possible.
8) If you have troubles reaching certain spots or hard-to-reach
corners, try using a cotton bud or purchase a Drinkwell
Kit (3 Brush Kit).
9) Once the fountain is completely disassembled you will have 6
plastic parts.

FOUNTAIN REASSEMBLY

1) Replace the pump into its location in between the three posts on
the right side of the fountain. Gently push down to engage the
suction cups. (Fig. 3a & 3b)

CLEANING
Fig. 3a
www.petsafe.net
Inline Plug
Fig. 2f
Cleaning
®
Fig. 3b