Operating Instructions - Petsafe Drinkwell Platinum Manuel D'utilisation

OPERATING INSTRUCTIONS

DO NOT RUN DRY - FOR INDOOR USE ONLY
Fountain will come fully assembled and ready for use.
1) As with any electrical device, check the electrical cord for any
tears, or damage before use.
2) Make sure the inline plug is connected. (No silver showing)
3) Remove the housing cover (lid) by placing your index fingers
into the inset groves on either side of the lid. Lift up. Set the lid
aside.
4) Lift up the reservoir and check to make sure the intake tube is
properly inserted into the motor. (Fig. 1a &1b)
5) Insert the charcoal filter. The filter will fit into the two triangular
slots in the center of the housing. The filter fits narrow side
down and the black side faces the front of the fountain. The
filter will slide easily into place.
NOTE: Rinse the filter thoroughly
under cool water before placing
into the housing. This will remove
any loose charcoal dust, which
is harmless. A small amount of
charcoal dust may shed for the
life of the filter. This is normal and
not harmful to your pet. (Fig. 1c)
Fig. 1a
www.petsafe.net
Fig. 1b
Fig. 1c
5