Reassembly; Testing The Litter Box - Petsafe Simply Clean Manuel D'utilisation

Do not submerge or expose the electrical components to water or cleaning solutions.
Always unplug the unit when not in use, before putting on or taking off parts and before cleaning.

Reassembly

1. Replace the litter bowl on the base unit.
2. Follow steps 2 - 8 in the "Start Here" section (pages 5 - 6).
NOTE
The conveyor cover and waste bin must be aligned correctly and fully inserted in unit to turn
on green indicator light. Green light must be on for the litter box to operate properly.
Only use clumping, scoopable, clay cat litter. Using a different type can cause the litter box to malfunction.
Do not let litter level fall below the fill line or the litter box may not operate properly.

Testing the Litter Box

The Simply Clean Automatic Litter Box continuously cleans 24 hours a day and makes one complete rotation per hour.
®
The bowl moves very slowly and is whisper-quiet, so your cat will not notice the movement.
1
1. To test if the litter box is rotating properly, place one
piece of adhesive tape on the base of the unit and one
piece of tape on the bowl of the unit.
2
2. After several minutes, the two pieces of tape should be
several inches apart. Remove the tape when
finished testing.
www.petsafe.net
9 9