Operating Instructions - Petsafe Drinkwell Grand Chien DOGC-AU-17 Manuel D'utilisation

Fontaine pour animaux de compagnie grand chien
Masquer les pouces Voir aussi pour Drinkwell Grand Chien DOGC-AU-17:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17

Operating Instructions

Important: DO NOT RUN DRY - FOR INDOOR USE ONLY. Pet Fountain will come
fully assembled and ready for use.
Note: Rinse all fountain parts with warm water before operating the pet fountain. This will
remove any dust or residue that remain in the system from the manufacturing process.
1. Carefully remove all the Pet Fountain components from the packaging and set aside
prior to assembly.
2. As with any electrical device, check the electrical Power Cord for any tears or
damage before use.
3. Inspect the bottom of the Pet Fountain to be sure the Pump is securely
attached (Fig. 1).
4. Remove the Housing Lid and insert the Charcoal Filter. The Charcoal Filter will fit
diagonally into the Housing. The Charcoal Filter fits narrow side down, with the black
side facing the front of the Pet Fountain (toward the spout). The Charcoal Filter will slide
easily into place, but make sure it is pushed all the way down into the Housing (Fig. 2).
Fig. 1
Important: Rinse the Charcoal Filter thoroughly under cool water before placing in the
Pet Fountain. This will remove any loose charcoal dust, which is harmless. A small amount
of charcoal dust may be released for the life of the Charcoal Filter. This is normal and not
harmful to your pet.
5. Place Pet Fountain in desired location before adding the Reservoir. Never pick up a
full Pet Fountain by the Housing. Only pick up the Pet Fountain by placing both hands
underneath the base of the Pet Fountain and grip the sidewalls for a sturdy hold.
Important: To protect your floor always use a protective mat such as a towel or
water-resistant placemat. This will protect your floor from splashing or spills caused by
your pet.
6. Before you plug the Pet Fountain in, make sure the electrical Power Cord, the Power
Adaptor and your hands are dry. Plug the Pet Fountain into a standard electrical outlet.
7. Fill both the Bowl and the Pet Fountain Housing with water only until the water reaches
the fill level in the Bowl.
8. Fill Reservoir with water.
Fig. 2
PUMP
www.petsafe.net
7

Publicité

Table des Matières
loading

Table des Matières